Hardware precautions
- Dropping the system or using carelessly may cause failure or damage and/or injury.
- If the system becomes unusually hot, stop using immediately and remove the battery.
- Do not transform the system when at an angle of over 45 degrees as shown below.
- Do not touch the terminals of the battery or charger directly.
- If the system, battery or charger are taken apart, warranty and support are void.
- Do not use batteries and chargers supplied by a 3rd party.
- Do not expose the system to water or liquid.
- Do not use outside the guaranteed operating temperature of 5~35C.
- Check for foreign objects before inserting or removing the battery and before transformation.
- Do not expose the system to high impact shocks.
- Do not operate the system and trigger with excessive force.
- Do not keep the trigger in the pulled position.
- Do not transform the system when holding in any positions other than the recommended one.
- Do not touch the transformation components during transformation.
- Grip sensor may falsely detect if there is a change in temperature or environment.
- Do not use and leave the system near babies and small children.
- Paint may peel with excessive repeated transformation.
- The box packaging is for transportation and storage only. It is not warranted.
- Display Mode sets DOMINATOR to automatic transformation and constant LED lighting for display. As DOMINATOR will transform automatically, you must use the OFFICIAL DOMINATOR STAND. Activating Display Mode without the OFFICIAL DOMINATOR STAND will damage DOMINATOR and could cause injury to yourself or others. Continuous automatic transformation and LED activation as a result of using Display Mode for long periods of time can cause performance degradation of DOMINATOR resulting in a shorter product life. Please be aware of this before activating Display Mode.
Other
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.